Baby BMW Forum banner

E93 15mm rear roll bar on e82

938 views 4 replies 3 participants last post by  Autosri  
#1 ·
Just wondering if anyone has done this before to confirm it fits properly
I’ve got one on the way to try but would be nice to know first
if it fits I’m hoping it will make a nice improvement with the LSD to get rid of the tiny 11mm factory one without going to stiff
 
#3 ·
So hopefuly the coupe and convertible are the same fitment then
Yeah I couldnt decide between the m3 bar or the 15mm non m bar but this one was pretty cheap and I’ve always had a tendency on previous cars to go too far then dial it back and this is only a road car
 
#4 ·
I believe the E93 bar is 15mm, which I guess is what you’ve gone for? The E93 M3 is 23.6mm, whereas the 1M and E90/E92 M3 have a 22.5mm rear bar. I’ve read that the 15mm bar is a good balance between controlling roll and maintaining traction without a diff’, you’ll probably need new ARB bushes, but should be a nice upgrade!
 
#5 ·
Yeah it’s the e93 convertible bar that I’ve ordered and I’ve already got new bushings on the way ,I’m sure they will be crusty and it’s sounds a relatively big job to fit there is no way I’m using crusty ones