Is there a setting in idrive to display temperature gauge?
Temperature gauge
1 reading
Jk911
41 - 60 of 66 Posts
Joined
·
153 Posts
Haha, I hope so! Crossing my fingers!
Looking forward to the meet, I need to see what the Jb4 is all about!
Looking forward to the meet, I need to see what the Jb4 is all about!
Joined
·
10,115 Posts
For all JB4 OBDll and jb4 connect users - oil temp is finally here.
Load up latest FW OBDII_EWG_6:
1) Added FSERIES To the name to avoid confusion among E series N55 owners.
2) Added automatic trans temp logging
3) Added output for oil temp for JB4 Mobile and updated JB4 interface
4) Added in timing on cyl 2-6 on a cycling scan of around 1hz. Will work on speeding up the timing data in future versions.
![Image]()
Looks like I will be relocating the canbus to behind the OBDll port finally to make the most of this latest JB4 FW update.....
BP
Load up latest FW OBDII_EWG_6:
1) Added FSERIES To the name to avoid confusion among E series N55 owners.
2) Added automatic trans temp logging
3) Added output for oil temp for JB4 Mobile and updated JB4 interface
4) Added in timing on cyl 2-6 on a cycling scan of around 1hz. Will work on speeding up the timing data in future versions.
Looks like I will be relocating the canbus to behind the OBDll port finally to make the most of this latest JB4 FW update.....
BP
Joined
·
535 Posts
Looks like it's time to buy a phone dash holder. Working on mine
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Joined
·
2,905 Posts
I was trying this for Terry. It works but seems a few degrees out from what it shown on the hidden menu.
Joined
·
1,282 Posts
Great news!!Blind Pugh said:For all JB4 OBDll and jb4 connect users - oil temp is finally here.
Load up latest FW OBDII_EWG_6:
1) Added FSERIES To the name to avoid confusion among E series N55 owners.
2) Added automatic trans temp logging
3) Added output for oil temp for JB4 Mobile and updated JB4 interface
4) Added in timing on cyl 2-6 on a cycling scan of around 1hz. Will work on speeding up the timing data in future versions.
![Image]()
Looks like I will be relocating the canbus to behind the OBDll port finally to make the most of this latest JB4 FW update.....
BP
BP I am on posi-tap any guide on how I can swop it over and update the JB4 firmware easily. I figured if I can install JB4 myself this shouldn't be too hard but I would like a solution that's easily removed without hassle if and when needed if possible?
Joined
·
2,905 Posts
No guide as such, you just unconnect your posi tap wires and feed the throught the bulkhead at the bonnet release cable. You'll need to remove the trim under the steering column and the trim surrounding the obdii port then posi tap on the back of the port. Update to latest obd fw and refit trim.
Joined
·
2,905 Posts
It's works in Celsius in the mobile app.Alexx said:
Joined
·
2,905 Posts
Click the ticky box for temperature under settings.
Joined
·
2,905 Posts
Perhaps it's different for iPhone then.
Joined
·
10,115 Posts
Alexx,Alexx said:I don't see it. Only have this for settings:
![Image]()
Sent from my iPhone using Tapatalk
Try updating your iPhone jb4 app...
BP
Joined
·
121 Posts
Anyone??m_raptor said:
Joined
·
121 Posts
Is there any computer changes from the M135 to the M2?
41 - 60 of 66 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
