Baby BMW Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Changed my lights yesterday to lci units following a thread on here, all good apart from having no reverse lights, I've changed the bulbs but still no joy, I've even put the bulbs from my old clusters in as I know they were good, I have a warning light on the dash too, any ideas what it could be? Any help would be much appreciated, cheers
 

· Registered
Joined
·
22,512 Posts
If you have followed these instructions correctly you must have a poor contact somewhere. Double check in daylight.

old left side -> new:

1 - black/purple -> blue/green
2 - green/yellow -> green/yellow
3 - brown -> brown
4 - empty -> empty
5 - blue/green -> black/purple
6 - green/purple -> green/purple (my wires were actually grey and purple)

old right side -> new:

1 - green/yellow -> blue/brown
2 - blue/brown -> green/red
3 - brown -> brown
4 - empty -> empty
5 - green/red -> black/blue
6 - black/blue -> green/yellow (my wires were actually grey and yellow)
 

· Registered
Joined
·
18 Posts
Discussion Starter · #5 ·
Blackbmw120d said:
If you have followed these instructions correctly you must have a poor contact somewhere. Double check in daylight.

old left side -> new:

1 - black/purple -> blue/green
2 - green/yellow -> green/yellow
3 - brown -> brown
4 - empty -> empty
5 - blue/green -> black/purple
6 - green/purple -> green/purple (my wires were actually grey and purple)

old right side -> new:

1 - green/yellow -> blue/brown
2 - blue/brown -> green/red
3 - brown -> brown
4 - empty -> empty
5 - green/red -> black/blue
6 - black/blue -> green/yellow (my wires were actually grey and yellow)
Yeah done that, maybe thinking it maybe the reverse switch, I'll check through the connections tomorrow and go from there
 

· Registered
Joined
·
1,095 Posts
yeah maybe reverse switch, maybe you have now noticed a problem that was there before you changed the clusters?
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top