Bmw 135i Yas Marin blue

Post pictures of your new baby in here. Please read the rules first though or your picture will be badly photo-chopped!!!!

Moderators: babybmwadmin, marco_polo, Producethis, Lambster, Rich196

ajl00
Junior Member
Junior Member
Posts: 26
Joined: Thu Apr 06, 2017 3:17 pm

Re: Bmw 135i Yas Marin blue

Post by ajl00 » Tue Nov 21, 2017 9:06 am

Try again that link above is not the correct item

https://www.ebay.co.uk/i/253133667032

ajl00
Junior Member
Junior Member
Posts: 26
Joined: Thu Apr 06, 2017 3:17 pm

Re: Bmw 135i Yas Marin blue

Post by ajl00 » Tue Nov 21, 2017 9:08 am

I had to flip the mounting housing over cut the brackets off and make and weld some new ones onto the housing .

ajl00
Junior Member
Junior Member
Posts: 26
Joined: Thu Apr 06, 2017 3:17 pm

Re: Bmw 135i Yas Marin blue

Post by ajl00 » Tue Nov 21, 2017 9:10 am

Personally I would start with the single cooler depending on usage of the car I should think that it will be up to the job . I went for the twin setup as I wanted to make it future proof . For any further performances upgrades

ajl00
Junior Member
Junior Member
Posts: 26
Joined: Thu Apr 06, 2017 3:17 pm

Re: Bmw 135i Yas Marin blue

Post by ajl00 » Tue Nov 21, 2017 9:18 am

I had to take a slight nip out off the bottom edge of the bumper return edge to clear the cooler housing, also I had to trim the wheel arch liner for clearance and air flow .

I’m considering m1 bumper and wing conversion so will give them a final tweek if I get round to it .


ImageImage

ajmanby
Knowledgeable Member
Knowledgeable Member
Posts: 144
Joined: Wed Jul 30, 2014 7:51 am

Re: Bmw 135i Yas Marin blue

Post by ajmanby » Tue Nov 21, 2017 10:19 am

Perfect, thanks for that! :D
2011 135i Bluewater with Coral red leather.. DCT - Pro Alloy IC - BMWP exhaust - Birds B1 suspension - M3 LCA - M3 ARB - Stage 1 camber plates - M3 Performance steering wheel - Alufelgen CS7 - Whiteline subframe inserts

Post Reply

Return to “Members Cars”